The range
Seven remote control mowers, one specification table
Choose by what you are cutting and how wide you need to cut it. Everything else — tracks, remote link, electric start — is shared across the range.
MAGNUS builds seven tracked remote control mowers in three families: P series two-blade decks (500 and 800 mm) for maintained grass; standard spade-rotor models (800 and 1,000 mm, 54–66 blades) for brush up to 3 m tall; and SA adaptive-lift models for uneven ground. All run Loncin 224–459 cc engines and a 200–500 m radio link.
Full specification
Manufacturer data for the current production range. Ask for the CE file and a data sheet for the model you shortlist.
| Model | Rotor | Cut width | Engine | Power | Generator | Lift | Cut height | Max growth | Radio | Size (cm) |
|---|---|---|---|---|---|---|---|---|---|---|
| MA-50P | 2 blade | 500 mm | Loncin 224 cc | 7 hp | 2,000 W | Electric actuator | 3–13 cm | 100 cm | 200–500 m | 103×103×63 |
| MA-80P | 2 blade | 800 mm | Loncin 452 cc | 14 hp | 2,000 W | Electric actuator | 3–13 cm | 150 cm | 200–500 m | 115×130×63 |
| MA-80 | 54 blade | 800 mm | Loncin 420 cc | 14 hp | 2,500 W | Hydraulic | 2–25 cm | 300 cm | 200–500 m | 166×102×75 |
| MA-80-SA | 54 blade | 800 mm | Loncin 420 cc | 14 hp | 2,000 W | Adaptive | 2–20 cm | 250 cm | 200–500 m | 163×102×73 |
| MA-100-1 | 66 blade | 1,000 mm | Loncin 459 cc | 16 hp | 2,500 W | Hydraulic | 2–25 cm | 300 cm | 200–500 m | 170×118×75 |
| MA-100-2 | 66 blade | 1,000 mm | Loncin 459 cc | 16 hp | 2,500 W | Hydraulic | 2–25 cm | 300 cm | 200–500 m | 170×118×75 |
| MA-100-SA | 66 blade | 1,000 mm | Loncin 459 cc | 16 hp | 2,000 W | Adaptive | 2–20 cm | 250 cm | 200–500 m | 163×118×73 |
All models: electric or pull start, motor drive, tracked chassis, 200–500 m radio range. Prices are quoted per order — freight, duty and configuration change the number, so we do not publish a list price.
Which family to look at first
Three families, one decision each.
P SERIES · 2 BLADE
MA-50P / MA-80P
Maintained grass, orchard rows, estate lawns. Cleaner finish, lighter machine, fits a pickup bed. Cuts growth to 1–1.5 m, not standing brush.
STANDARD · SPADE ROTOR
MA-80 / MA-100-1 / MA-100-2
Brush, bramble, saplings, roadside verges. 54–66 blades, hydraulic lift, standing growth to 3 m. The workhorse family for contractors.
SA SERIES · ADAPTIVE
MA-80-SA / MA-100-SA
Uneven pasture, terraces, embankments. The deck follows ground contour instead of holding a fixed height, so it scalps less on undulating ground.
The seven models
Photographs are of production units. Angles vary by model depending on what we have photographed.
MA-50P
The smallest machine we build, and the only one that comfortably fits through a 1 m gate. A 500 mm two-blade deck on a 103 cm chassis, with an electric actuator setting cut height between 3 and 13 cm.
- Cutting width
- 500 mm
- Engine
- Loncin 224 cc / 7 hp
- Cut height
- 3–13 cm
- Max growth
- 100 cm
- Machine size
- 103×103×63 cm
Quote the MA-50P
MA-80P
The estate and orchard machine: 800 mm two-blade deck, 452 cc engine, electric lift. Clean cut on grass up to 1.5 m, and narrow enough for rows between mature trees.
- Cutting width
- 800 mm
- Engine
- Loncin 452 cc / 14 hp
- Cut height
- 3–13 cm
- Max growth
- 150 cm
- Machine size
- 115×130×63 cm
Quote the MA-80P
MA-80
The entry point into brush work. A 54-blade rotor on an 800 mm hydraulic deck, rated for standing growth up to 3 m. Heavier than the P series because the rotor and hydraulic system add mass.
- Cutting width
- 800 mm
- Rotor
- 54 free-swinging blades
- Engine
- Loncin 420 cc / 14 hp
- Cut height
- 2–25 cm, hydraulic
- Machine size
- 166×102×75 cm
Quote the MA-80
MA-80-SA
The 800 mm SA model. Instead of holding a fixed deck height, the head follows the ground, which reduces scalping on undulating pasture and terraced ground. Cut range is slightly shallower than the hydraulic standard models.
- Cutting width
- 800 mm
- Rotor
- 54 blades
- Lift
- Adaptive
- Cut height
- 2–20 cm
- Machine size
- 163×102×73 cm
Quote the MA-80-SA
MA-100-1
A 1,000 mm rotor with 66 blades and a 16 hp engine. The widest cut we make, intended for roadside verges and right-of-way where pass count drives the cost.
- Cutting width
- 1,000 mm
- Rotor
- 66 blades
- Engine
- Loncin 459 cc / 16 hp
- Cut height
- 2–25 cm, hydraulic
- Machine size
- 170×118×75 cm
Quote the MA-100-1
MA-100-2
The same 1,000 mm / 66-blade platform as the MA-100-1 in the current body shell. This is the model we ship most often to contractors and rental fleets.
- Cutting width
- 1,000 mm
- Rotor
- 66 blades
- Engine
- Loncin 459 cc / 16 hp
- Cut height
- 2–25 cm, hydraulic
- Machine size
- 170×118×75 cm
Quote the MA-100-2
MA-100-SA
Widest adaptive model. Built for terraced vineyards and embankments where the ground angle changes under the machine and a fixed deck would scalp or leave uncut strips.
- Cutting width
- 1,000 mm
- Rotor
- 66 blades
- Lift
- Adaptive
- Cut height
- 2–20 cm
- Machine size
- 163×118×73 cm
Quote the MA-100-SA
What ships with every unit
One crate per machine, sea or rail freight. Air freight is not practical at these weights.
- Machine and transmitter paired and tested before crating
- Tool kit blade spanner, grease gun, track tension gauge
- Documentation operator manual, parts list, CE declaration of conformity
- Spares one spare blade set and air filter
- Packaging export carton with your branding if OEM
Payment terms. 50% T/T in advance, balance before shipment. LC, D/P, PayPal and Western Union accepted for smaller amounts. Inspection by photo and remote video before the container is sealed.
Tell us what you need to cut.
Share your terrain, area and vegetation type. We come back with a model recommendation and a landed price.